Liquid Trap Magnets are engineered to remove ferrous contaminants from liquid and slurry lines. Efficiently remove tramp iron before maintenance and product contamination problems occur. The benefits of this magnetic separator can be experienced in most cases with no appreciable pressure drop or reduction in flow rates. All units incorporate a sump type housing to trap non-ferrous particles and may be installed horizontally, vertically, or on an angle without affecting their magnetic efficiency.
Puritan Magnetics’ USDA approved (US Department of Agriculture Approved) units are for high volume applications requiring gentle flow characteristics (cottage cheese, fruit preserves, etc). The exploded view shows the product flow is split by the internal baffle and diverted onto two flat plate magnets. Different sized baffles can be provided to match your product’s need.
Available in 1″ – 4″ line sizes with most sanitary connections or in pipe sizes, pipe flanges, camlocks or pipe threads. The body can have different sized connectors if it is desirable to use the Liquid Plate Magnet as a line reducer/expander. Water jackets are optional. Even different sized baffles are not a problem.
*Now available in 6” line sizes with pressures to 75 PSI
Food Grade Finish
This product finish is intended for use in applications where product retention is a concern or powdered products are handled. An example of products intended for this type of finish are sugar, spices, grains, and other similar products in granular or powdered form. The final product may be consumed by humans or animals.
All construction is stainless steel including frames, flanges and end plates. All welds are continuous with no pits, cracks, or crevices on any internal product contact surfaces. External welds that do not come in contact with the product may be stitch welded. All stainless steel is either polished with a scotchbrite type polishing pad or sand blasted using a glass media.
Sanitary Grade Finish
This product finish is intended for use in applications where bacteria easily forms and sanitary policies or FDA regulations are a concern. An example of products are pharmaceuticals, dairy products, and other finished products intended for human or animal consumption.
All construction is stainless steel. All product contact surfaces are formed or welds are continuous and then ground and polished smooth to a 150 grit finish. All product contact surfaces shall have a finish at least as smooth as a No. 4 ground finish and be free from imperfections such as pits, cracks, and crevices. Non product contact areas are continuously seam welded. Product contact surfaces intended for wet cleaning are self draining. Equipment is designed for simple dismantling and cleaning of surfaces and components.
All of Puritan Magnetics’ Group 2000 Separation Products are manufactured using only stainless steel enclosed construction where permissible. This includes stainless steel angle inlet and outlet flanges, housings, hinges, latches, and all product contact areas. POW-R CLEAN units are equipped with pneumatic cylinders that are constructed with a stainless steel body and rod. All seals, wipers, and gasket materials conform to FDA regulations.
ENGINEERED FOR YOUR SUCCESS
Consider Puritan Magnetics Inc.